Tiny Core Linux 5.3 "piCore" 发布

jopen 10年前

Tiny Core Linux是一份12兆字节的图形化Linux桌面。它基于Linux 2.6内核、BusyBox、Tiny X、Fltk、Flwm。其核心完全运行于内存中并且启动非常快。用户对需要支持哪些应用程序和/或额外硬件拥有完全的控制,无论系统是面向台式机、上网 机、应用服务器;这可以从该项目的在线软件仓库中进行选择。

Team Tiny Core is pleased to announce the immediate availability of piCore-5.3:


kernel updated to 3.14.4
Raspberry Pi firmware updated to May 12, 2014 version
e2fsprogs updated to 1.42.10
util-linux updated to 2.24
official BusyBox patches applied
curaga's wget3 BusyBox patch applied, setting default timeout to 10s
tce-load: Don't show an error when extension contains multiple modules
tce-load: Use sudo when unmounting meta-extensions
patched to enable HDMI sound at 192 kbit/s rate (thanks sbp)
patched rtl8192cu driver to disable powersaving
enabled CMA and FIQ-FSM by default
filetool.sh "Done" message cosmetics

Please note, alsa-modules-3.14.4-piCore+.tcz has no startup script to avoid conflicts with DACS, necessary modules must be loaded by user, including on-chip sound device.

Images with preinstalled SSH for headless operation and with GUI also available.

QEMU version is now available. For instructions read http://forum.tinycorelinux.net/index.php/topic,14080.0.html

Updating previous versions on Raspberry Pi without removing SD card

Download piCore-5.3rc4-boot.tar.gz extract to a temporaray folder and overwrite content of /mnt/mmcblk0p1 after mounting it. It will overwrite custom boot options. If you have customied cmdline.txt on config.txt in the old system, do it again. Do not reboot if using wireless remote connection, otherwise you will loose connection due to incompatible kernel modules!

Next download kernel module tcz's from the repo matching new kernel version and reboot. You must have a new, updated system working.

Please note, there may be kernel module extensions which are not yet available in the repo.

Before modifying mmcblk01 content, it is adviced to make backup to a persistent device.

For support visit http://forum.tinycorelinux.net/index.php/board,57.0.html