Android 文件读写操作 总结

jopen 9年前

在android中的文件放在不同位置,它们的读取方式也有一些不同。

本文对android中对资源文件的读取、数据区文件的读取、SD卡文件的读取及RandomAccessFile的方式和方法进行了整理。供参考。

 

一、资源文件的读取:

      1) 从resource的raw中读取文件数据:

String res = "";   try{          //得到资源中的Raw数据流      InputStream in = getResources().openRawResource(R.raw.test);         //得到数据的大小      int length = in.available();               byte [] buffer = new byte[length];                //读取数据      in.read(buffer);                 //依test.txt的编码类型选择合适的编码,如果不调整会乱码       res = EncodingUtils.getString(buffer, "BIG5");             //关闭          in.close();                   }catch(Exception e){         e.printStackTrace();              } 

 2) 从resource的asset中读取文件数据
String fileName = "test.txt"; //文件名字   String res="";   try{        //得到资源中的asset数据流     InputStream in = getResources().getAssets().open(fileName);        int length = in.available();              byte [] buffer = new byte[length];               in.read(buffer);                 in.close();     res = EncodingUtils.getString(buffer, "UTF-8");           }catch(Exception e){           e.printStackTrace();                } 

 

二、读写/data/data/<应用程序名>目录上的文件:
//写数据  public void writeFile(String fileName,String writestr) throws IOException{     try{             FileOutputStream fout =openFileOutput(fileName, MODE_PRIVATE);             byte [] bytes = writestr.getBytes();             fout.write(bytes);             fout.close();         }             catch(Exception e){           e.printStackTrace();          }   }     //读数据  public String readFile(String fileName) throws IOException{     String res="";     try{            FileInputStream fin = openFileInput(fileName);            int length = fin.available();            byte [] buffer = new byte[length];            fin.read(buffer);                res = EncodingUtils.getString(buffer, "UTF-8");            fin.close();            }        catch(Exception e){            e.printStackTrace();        }        return res;     }   

三、读写SD卡中的文件。也就是/mnt/sdcard/目录下面的文件 :
//写数据到SD中的文件  public void writeFileSdcardFile(String fileName,String write_str) throws IOException{    try{            FileOutputStream fout = new FileOutputStream(fileName);          byte [] bytes = write_str.getBytes();            fout.write(bytes);          fout.close();        }          catch(Exception e){           e.printStackTrace();          }      }         //读SD中的文件  public String readFileSdcardFile(String fileName) throws IOException{     String res="";     try{            FileInputStream fin = new FileInputStream(fileName);              int length = fin.available();              byte [] buffer = new byte[length];            fin.read(buffer);                  res = EncodingUtils.getString(buffer, "UTF-8");              fin.close();               }             catch(Exception e){            e.printStackTrace();           }           return res;   } 

四、使用File类进行文件的读写:
//读文件  public String readSDFile(String fileName) throws IOException {              File file = new File(fileName);              FileInputStream fis = new FileInputStream(file);              int length = fis.available();              byte [] buffer = new byte[length];            fis.read(buffer);                  res = EncodingUtils.getString(buffer, "UTF-8");              fis.close();                return res;    }      //写文件  public void writeSDFile(String fileName, String write_str) throws IOException{              File file = new File(fileName);              FileOutputStream fos = new FileOutputStream(file);              byte [] bytes = write_str.getBytes();             fos.write(bytes);             fos.close();   } 

五、另外,File类还有下面一些常用的操作:
String Name = File.getName();  //获得文件或文件夹的名称:  String parentPath = File.getParent();  //获得文件或文件夹的父目录  String path = File.getAbsoultePath();//绝对路经  String path = File.getPath();//相对路经   File.createNewFile();//建立文件    File.mkDir(); //建立文件夹    File.isDirectory(); //判断是文件或文件夹  File[] files = File.listFiles();  //列出文件夹下的所有文件和文件夹名  File.renameTo(dest);  //修改文件夹和文件名  File.delete();  //删除文件夹或文件

六、使用RandomAccessFile进行文件的读写:

RandomAccessFile的使用方法比较灵活,功能也比较多,可以使用类似seek的方式可以跳转到文件的任意位置,从文件指示器当前位置开始读写。
它有两种构造方法
new RandomAccessFile(f,"rw");//读写方式
new RandomAccessFile(f,"r");//只读方式
使用事例:

/*    * 程序功能:演示了RandomAccessFile类的操作,同时实现了一个文件复制操作。    */        import java.io.*;        public class RandomAccessFileDemo {     public static void main(String[] args) throws Exception {      RandomAccessFile file = new RandomAccessFile("file", "rw");      // 以下向file文件中写数据      file.writeInt(20);// 占4个字节      file.writeDouble(8.236598);// 占8个字节      file.writeUTF("这是一个UTF字符串");// 这个长度写在当前文件指针的前两个字节处,可用readShort()读取      file.writeBoolean(true);// 占1个字节      file.writeShort(395);// 占2个字节      file.writeLong(2325451l);// 占8个字节      file.writeUTF("又是一个UTF字符串");      file.writeFloat(35.5f);// 占4个字节      file.writeChar('a');// 占2个字节          file.seek(0);// 把文件指针位置设置到文件起始处          // 以下从file文件中读数据,要注意文件指针的位置      System.out.println("——————从file文件指定位置读数据——————");      System.out.println(file.readInt());      System.out.println(file.readDouble());      System.out.println(file.readUTF());          file.skipBytes(3);// 将文件指针跳过3个字节,本例中即跳过了一个boolean值和short值。      System.out.println(file.readLong());          file.skipBytes(file.readShort()); // 跳过文件中“又是一个UTF字符串”所占字节,注意readShort()方法会移动文件指针,所以不用加2。      System.out.println(file.readFloat());            //以下演示文件复制操作      System.out.println("——————文件复制(从file到fileCopy)——————");      file.seek(0);      RandomAccessFile fileCopy=new RandomAccessFile("fileCopy","rw");      int len=(int)file.length();//取得文件长度(字节数)      byte[] b=new byte[len];      file.readFully(b);      fileCopy.write(b);      System.out.println("复制完成!");     }    }  

 

七、读取资源文件时能否实现类似于seek的方式可以跳转到文件的任意位置,从指定的位置开始读取指定的字节数呢?

答案是可以的。

在FileInputStream和InputStream中都有下面的函数:

public long skip (long byteCount); //从数据流中跳过n个字节  public int read (byte[] buffer, int offset, int length); //从数据流中读取length数据存在buffer的offset开始的位置。offset是相对于buffer的开始位置的,不是数据流。

可以使用这两个函数来实现类似于seek的操作,请看下面的测试代码:
//其中read_raw是一个txt文件,存放在raw目录下。  //read_raw.txt文件的内容是:"ABCDEFGHIJKLMNOPQRST"  public String getRawString() throws IOException {      String str = null;      InputStream in = getResources().openRawResource(R.raw.read_raw);      int length = in.available();   byte[] buffer = new byte[length];      in.skip(2); //跳过两个字节   in.read(buffer,0,3); //读三个字节      in.skip(3); //跳过三个字节   in.read(buffer,0,3); //读三个字节      //最后str="IJK"   str = EncodingUtils.getString(buffer, "BIG5");         in.close();      return str;  }

从上面的实例可以看出skip函数有点类似于C语言中的seek操作,但它们之间有些不同。

需要注意的是:

1、skip函数始终是从当前位置开始跳的。在实际应用当中还要再判断一下该函数的返回值。

2、read函数也始终是当前位置开始读的。

3、另外,还可以使用reset函数将文件的当前位置重置为0,也就是文件的开始位置。

 

如何得到文件的当前位置?

我没有找到相关的函数和方法,不知道怎么样才能得到文件的当前位置,貌似它也并不是太重要。

 

八、如何从FileInputStream中得到InputStream?

public String readFileData(String fileName) throws IOException{     String res="";     try{            FileInputStream fin = new FileInputStream(fileName);     InputStream in = new BufferedInputStream(fin);             ...          }        catch(Exception e){            e.printStackTrace();         }    }

九、APK资源文件的大小不能超过1M,如果超过了怎么办?我们可以将这个数据再复制到data目录下,然后再使用。复制数据的代码如下:

 public boolean assetsCopyData(String strAssetsFilePath, String strDesFilePath){          boolean bIsSuc = true;          InputStream inputStream = null;          OutputStream outputStream = null;                    File file = new File(strDesFilePath);          if (!file.exists()){              try {                 file.createNewFile();                 Runtime.getRuntime().exec("chmod 766 " + file);              } catch (IOException e) {                 bIsSuc = false;              }                        }else{//存在              return true;          }                    try {              inputStream = getAssets().open(strAssetsFilePath);              outputStream = new FileOutputStream(file);                            int nLen = 0 ;                            byte[] buff = new byte[1024*1];              while((nLen = inputStream.read(buff)) > 0){                 outputStream.write(buff, 0, nLen);              }                            //完成          } catch (IOException e) {              bIsSuc = false;          }finally{              try {                 if (outputStream != null){                     outputStream.close();                 }                                  if (inputStream != null){                     inputStream.close();                 }              } catch (IOException e) {                 bIsSuc = false;              }                        }                    return bIsSuc;       } 

 总结:

1、apk中有两种资源文件,使用两种不同的方式进行打开使用。
raw使用InputStream in = getResources().openRawResource(R.raw.test);
asset使用InputStream in = getResources().getAssets().open(fileName);

这些数据只能读取,不能写入。更重要的是该目录下的文件大小不能超过1M。

同时,需要注意的是,在使用InputStream的时候需要在函数名称后加上throws IOException。

2、SD卡中的文件使用FileInputStream和FileOutputStream进行文件的操作。
3、存放在数据区(/data/data/..)的文件只能使用openFileOutput和openFileInput进行操作。
注意不能使用FileInputStream和FileOutputStream进行文件的操作。
4、RandomAccessFile类仅限于文件的操作,不能访问其他IO设备。它可以跳转到文件的任意位置,从当前位置开始读写。

5、InputStream和FileInputStream都可以使用skip和read(buffre,offset,length)函数来实现文件的随机读取。

来自:http://blog.csdn.net/ztp800201/article/details/7322110