使用mysql-proxy 快速实现mysql 集群 读写分离

openkk 12年前

目前较为常见的mysql读写分离分为两种:
1、 基于程序代码内部实现:在代码中对select操作分发到从库;其它操作由主库执行;这类方法也是目前生产环境应用最广泛,知名的如DISCUZ X2。优点是性能较好,因为在程序代码中实现,不需要增加额外的设备作为硬件开支。缺点是需要开发人员来实现,运维人员无从下手。 

2、 基于中间代理层实现:我们都知道代理一般是位于客户端和服务器之间,代理服务器接到客户端请求后通过判断然后转发到后端数据库。在这有两个代表性程序

使用mysql-proxy 快速实现mysql 集群 读写分离

mysql-proxy:mysql-proxy为mysql开源项目,通过其自带的lua脚本进行sql判断,虽然是mysql官方产品,但是mysql官方并不建议将mysql-proxy用到生产环境。 
amoeba:由陈思儒开发,作者曾就职于阿里巴巴,现就职于盛大。该程序由java语言进行开发,目前只听说阿里巴巴将其用于生产环境。另外,此项目严重缺少维护和推广(作者有个官方博客,很多用户反馈的问题发现作者不理睬)
经 过上述简单的比较,通过程序代码实现mysql读写分离自然是一个不错的选择。但是并不是所有的应用都适合在程序代码中实现读写分离,像大型SNS、 B2C这类应用可以在代码中实现,因为这样对程序代码本身改动较小;像一些大型复杂的java应用,这种类型的应用在代码中实现对代码改动就较大了。所 以,像这种应用一般就会考虑使用代理层来实现。


下面我们看一下如何搭建mysql-proxy来实现mysql读写分离
 
环境拓扑如下:
 
关于mysql、mysql主从的搭建,在此不再演示,如下的操作均在mysql-proxy(192.168.1.200)服务器进行
一、安装mysql-proxy
1、安装lua  (mysql-proxy需要使用lua脚本进行数据转发)
#tar zxvf lua-5.1.4.tar.gz
#cd lua-5.1.4
#vi Makefile,修改INSTALL_TOP= /usr/local/lua
#make posix
#make install
 
2、安装libevent
#tar zxvf libevent-2.0.8-rc.tar.gz
#cd libevent-2.0.8-rc
#./configure --prefix=/usr/local/libevent
#make && make install
 
3、安装check
#tar zxvf check-0.9.8.tar.gz
#cd check-0.9.8
#./configure && make && make install
 
4、安装mysql客户端
#tar zxvf mysql-5.0.92.tar.gz
#cd mysql-5.0.92
#./configure --without-server && make && make install
 
5、设置环境变量 (安装mysql-proxy所需变量)
#vi /etc/profile
export LUA_CFLAGS="-I/usr/local/lua/include" LUA_LIBS="-L/usr/local/lua/lib -llua -ldl" LDFLAGS="-L/usr/local/libevent/lib -lm"
export CPPFLAGS="-I/usr/local/libevent/include"
export CFLAGS="-I/usr/local/libevent/include"
# source /etc/profile
 
6、安装mysql-proxy
#tar zxvf mysql-proxy-0.6.0.tar.gz
#cd mysql-proxy-0.6.0
# ./configure --prefix=/usr/local/mysql-proxy --with-mysql --with-lua
#make && make install
 
7、启动mysql-proxy
本次对两台数据库实现了读写分离;mysql-master为可读可写,mysql-slave为只读
#/usr/local/mysql-proxy/sbin/mysql-proxy --proxy-backend-addresses=192.168.1.201:3306 --proxy-read-only-backend-addresses=192.168.1.202:3306 --proxy-lua-script=/usr/local/mysql-proxy/share/mysql-proxy/rw-splitting.lua & 
 
注:如果正常情况下启动后终端不会有任何提示信息,mysql-proxy启动后会启动两个端口4040和4041,4040用于SQL转发,4041用于管理mysql-proxy。如有多个mysql-slave可以依次在后面添加
 
 
二、测试
1、连接测试
因为默认情况下mysql数据库不允许用户在远程连接
mysql>grant all privileges on *.* to identified by '123456';
mysql>flush privileges;
 
客户端连接
#mysql -uroot -p123456 -h192.168.1.200 -P4040
 
 
2、读写分离测试
为了测试出mysql读写分离的真实性,在测试之前,需要开启两台mysql的log功能,然后在mysql-slave服务器停止复制
① 、在两台mysql配置文件my.cnf中加入log=query.log,然后重启

② 、在mysql-slave上执行SQL语句stop slave

③ 、在两台mysql上执行#tail -f /usr/local/mysql/var/query.log

④ 、在客户端上连接mysql(三个连接以上),然后执行create、select等SQL语句,观察两台mysql的日志有何变化


注:生产环境中除了进行程序调试外,其它不要开启mysql查询日志,因为查询日志记录了客户端的所有语句,频繁的IO操作将会导致mysql整体性能下降
 
总 结:在上述环境中,mysql-proxy和mysql-master、mysql-slave三台服务器均存在单点故障。如果在可用性要求较高的场合, 单点隐患是绝对不允许的。为了避免mysql-proxy单点隐患有两种方法,一种方法是mysql-proxy配合keepalived做双机,另一种 方法是将mysql-proxy和应用服务安装到同一台服务器上;为了避免mysql-master单点故障可以使用DRBD+heartbear做双 机;避免mysql-slave单点故障增加多台mysql-slave即可,因为mysql-proxy会自动屏蔽后端发生故障的mysql- slave。

 

附: mysql-proxy LUA 读写分离脚本代码:

--[[
--
-- author : KDr2
-- version 0.01
-- SYNOPSIS:
---  1.维护了一个连接池
---  2.读写分离,简单的将select开头的语句放到slave上执行
---  3.事务支持,所有事务放到master上执行,事务中不更改连接
---  4.简单日志
--
--]]

--- config vars
local min_idle_connections = 4
local max_idle_connections = 8
local log_level=1
local encoding="utf8"
--- end of config


-- 事务标识,在事务内不归还连接
local transaction_flags={}
setmetatable(transaction_flags,{__index=function() return 0 end})

-- log system
log={
   level={debug=1,info=2,warn=3,error=4},
   funcs={"debug","info","warn","error"},
}
function log.log(level,m)
   if level >= log_level then
      local msg="[" .. os.date("%Y-%m-%d %X") .."] ".. log.funcs[level] .. ": " .. tostring(m)
      print(msg) -- TODO  write msg into a log file.
   end
end
for i,v in ipairs(log.funcs) do
   log[v]=function(m) log.log(log.level[v],m) end
end

-- connect to server
function connect_server()
   log.info(" starting connect_server ... ")
   local least_idle_conns_ndx = 0
   local least_idle_conns = 0
  
   for i = 1, #proxy.backends do
      local s = proxy.backends[i]
      local pool = s.pool
      local cur_idle = pool.users[""].cur_idle_connections

      log.debug("[".. s.address .."].connected_clients = " .. s.connected_clients)
      log.debug("[".. s.address .."].idling_connections = " .. cur_idle)
      log.debug("[".. s.address .."].type = " .. s.type)
      log.debug("[".. s.address .."].state = " .. s.state)

      if s.state ~= proxy.BACKEND_STATE_DOWN then
         -- try to connect to each backend once at least
         if cur_idle == 0 then
            proxy.connection.backend_ndx = i
            log.info("server [".. proxy.backends[i].address .."] open new connection")
            return
         end
         -- try to open at least min_idle_connections
         if least_idle_conns_ndx == 0 or
            ( cur_idle < min_idle_connections and
              cur_idle < least_idle_conns ) then
            least_idle_conns_ndx = i
            least_idle_conns = cur_idle
         end
      end
   end

   if least_idle_conns_ndx > 0 then
      proxy.connection.backend_ndx = least_idle_conns_ndx
   end
  
   if proxy.connection.backend_ndx > 0 then
      local s = proxy.backends[proxy.connection.backend_ndx]
      local pool = s.pool
      local cur_idle = pool.users[""].cur_idle_connections

      if cur_idle >= min_idle_connections then
         -- we have 4 idling connections in the pool, that's good enough
         log.debug("using pooled connection from: " .. proxy.connection.backend_ndx)
         return proxy.PROXY_IGNORE_RESULT
      end
   end
   -- open a new connection
   log.info("opening new connection on: " .. proxy.backends[proxy.connection.backend_ndx].address)
end

---

-- auth.packet is the packet
function read_auth_result( auth )
   if auth.packet:byte() == proxy.MYSQLD_PACKET_OK then
      -- 连接正常
      proxy.connection.backend_ndx = 0
   elseif auth.packet:byte() == proxy.MYSQLD_PACKET_EOF then
      -- we received either a
      -- * MYSQLD_PACKET_ERR and the auth failed or
      -- * MYSQLD_PACKET_EOF which means a OLD PASSWORD (4.0) was sent
      log.error("(read_auth_result) ... not ok yet");
   elseif auth.packet:byte() == proxy.MYSQLD_PACKET_ERR then
      log.error("auth failed!")
   end
end


---
-- read/write splitting
function read_query( packet )
   log.debug("[read_query]")
   log.debug("authed backend = " .. proxy.connection.backend_ndx)
   log.debug("used db = " .. proxy.connection.client.default_db)

   if packet:byte() == proxy.COM_QUIT then
      proxy.response = {
         type = proxy.MYSQLD_PACKET_OK,
      }
      return proxy.PROXY_SEND_RESULT
   end

   if proxy.connection.backend_ndx == 0 then
      local is_read=(string.upper(packet:sub(2))):match("^SELECT")
      local target_type=proxy.BACKEND_TYPE_RW
      if is_read then target_type=proxy.BACKEND_TYPE_RO end
      for i = 1, #proxy.backends do
         local s = proxy.backends[i]
         local pool = s.pool
         local cur_idle = pool.users[proxy.connection.client.username].cur_idle_connections
        
         if cur_idle > 0 and
            s.state ~= proxy.BACKEND_STATE_DOWN and
            s.type == target_type then
            proxy.connection.backend_ndx = i
            break
         end
      end
   end
   -- sync the client-side default_db with the server-side default_db
   if proxy.connection.server and proxy.connection.client.default_db ~= proxy.connection.server.default_db then
      local server_db=proxy.connection.server.default_db
      local client_db=proxy.connection.client.default_db
      local default_db= (#client_db > 0) and client_db or server_db
      if #default_db > 0 then
         proxy.queries:append(2, string.char(proxy.COM_INIT_DB) .. default_db)
         proxy.queries:append(2, string.char(proxy.COM_QUERY) .. "set names '" .. encoding .."'")
         log.info("change database to " .. default_db);
      end
   end
   if proxy.connection.backend_ndx > 0 then
      log.debug("Query[" .. packet:sub(2) .. "] Target is [" .. proxy.backends[proxy.connection.backend_ndx].address .."]")
   end
   proxy.queries:append(1, packet)
   return proxy.PROXY_SEND_QUERY
end

---
-- as long as we are in a transaction keep the connection
-- otherwise release it so another client can use it
function read_query_result( inj )
   local res      = assert(inj.resultset)
   local flags    = res.flags

   if inj.id ~= 1 then
      -- ignore the result of the USE
      return proxy.PROXY_IGNORE_RESULT
   end
   is_in_transaction = flags.in_trans

   if flags.in_trans then
      transaction_flags[proxy.connection.server.thread_id] = transaction_flags[proxy.connection.server.thread_id] + 1
   elseif inj.query:sub(2):lower():match("^%s*commit%s*$") or inj.query:sub(2):lower():match("^%s*rollback%s*$") then
      transaction_flags[proxy.connection.server.thread_id] = transaction_flags[proxy.connection.server.thread_id] - 1
      if transaction_flags[proxy.connection.server.thread_id] < 0 then transaction_flags[proxy.connection.server.thread_id] = 0 end
   end
  
   log.debug("transaction res : " .. tostring(transaction_flags[proxy.connection.server.thread_id]));
   if transaction_flags[proxy.connection.server.thread_id]==0 or transaction_flags[proxy.connection.server.thread_id] == nil then
      -- isnot in a transaction, need to release the backend
      proxy.connection.backend_ndx = 0
   end
end

---
-- close the connections if we have enough connections in the pool
--
-- @return nil - close connection
-- IGNORE_RESULT - store connection in the pool
function disconnect_client()
   log.debug("[disconnect_client]")
   if proxy.connection.backend_ndx == 0 then
      for i = 1, #proxy.backends do
         local s = proxy.backends[i]
         local pool = s.pool
         local cur_idle = pool.users[proxy.connection.client.username].cur_idle_connections
        
         if s.state ~= proxy.BACKEND_STATE_DOWN and
            cur_idle > max_idle_connections then
            -- try to disconnect a backend
            proxy.connection.backend_ndx = i
            log.info("[".. proxy.backends[i].address .."] closing connection, idling: " .. cur_idle)
            return
         end
      end
      return proxy.PROXY_IGNORE_RESULT
   end
end