Additional Resources 4 Easy Ways to Learn More and Stay Current Programming Newsletter Get programming related news and content delivered weekly to your inbox. oreilly.com/programming/newsletter Free Webcast Series Learn about popular programming topics from experts live, online. webcasts.oreilly.com O’Reilly Radar Read more insight and analysis about emerging technologies. radar.oreilly.com Conferences Immerse yourself in learning at an upcoming O’Reilly conference. conferences.oreilly.com ©2015 O’Reilly Media, Inc. The O’Reilly logo is a registered trademark of O’Reilly Media, Inc. #15305 Mark Richards Software Architecture Patterns Understanding Common Architecture Patterns and When to Use Them 978-1-491-92424-2 [LSI] Software Architecture Patterns by Mark Richards Copyright © 2015 O’Reilly Media, Inc. All rights reserved. Printed in the United States of America. Published by O’Reilly Media, Inc., 1005 Gravenstein Highway North, Sebastopol, CA 95472. O’Reilly books may be purchased for educational, business, or sales promotional use. Online editions are also available for most titles (http://safaribooksonline.com). For more information, contact our corporate/institutional sales department: 800-998-9938 or email@example.com. Editor: Heather Scherer Production Editor: Colleen Lobner Copyeditor: Amanda Kersey Interior Designer: David Futato Cover Designer: Ellie Volckhausen Illustrator: Rebecca Demarest February 2015: First Edition Revision History for the First Edition 2015-02-24: First Release 2015-03-30: Second Release The O’Reilly logo is a registered trademark of O’Reilly Media, Inc. Software Architec‐ ture Patterns, the cover image, and related trade dress are trademarks of O’Reilly Media, Inc. While the publisher and the author have used good faith efforts to ensure that the information and instructions contained in this work are accurate, the publisher and the author disclaim all responsibility for errors or omissions, including without limi‐ tation responsibility for damages resulting from the use of or reliance on this work. Use of the information and instructions contained in this work is at your own risk. If any code samples or other technology this work contains or describes is subject to open source licenses or the intellectual property rights of others, it is your responsi‐ bility to ensure that your use thereof complies with such licenses and/or rights. Table of Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v 1. Layered Architecture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Pattern Description 1 Key Concepts 3 Pattern Example 5 Considerations 7 Pattern Analysis 8 2. Event-Driven Architecture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Mediator Topology 11 Broker Topology 14 Considerations 17 Pattern Analysis 18 3. Microkernel Architecture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Pattern Description 21 Pattern Examples 23 Considerations 24 Pattern Analysis 25 4. Microservices Architecture Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Pattern Description 27 Pattern Topologies 29 Avoid Dependencies and Orchestration 32 Considerations 33 Pattern Analysis 34 iii 5. Space-Based Architecture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Pattern Description 38 Pattern Dynamics 39 Considerations 42 Pattern Analysis 43 A. Pattern Analysis Summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 iv | Table of Contents Introduction It’s all too common for developers to start coding an application without a formal architecture in place. Without a clear and well- defined architecture, most developers and architects will resort to the de facto standard traditional layered architecture pattern (also called the n-tier architecture), creating implicit layers by separating source-code modules into packages. Unfortunately, what often results from this practice is a collection of unorganized source-code modules that lack clear roles, responsibilities, and relationships to one another. This is commonly referred to as the big ball of mud architecture anti-pattern. Applications lacking a formal architecture are generally tightly cou‐ pled, brittle, difficult to change, and without a clear vision or direc‐ tion. As a result, it is very difficult to determine the architectural characteristics of the application without fully understanding the inner-workings of every component and module in the system. Basic questions about deployment and maintenance are hard to answer: Does the architecture scale? What are the performance characteristics of the application? How easily does the application respond to change? What are the deployment characteristics of the application? How responsive is the architecture? Architecture patterns help define the basic characteristics and behavior of an application. For example, some architecture patterns naturally lend themselves toward highly scalable applications, whereas other architecture patterns naturally lend themselves toward applications that are highly agile. Knowing the characteris‐ tics, strengths, and weaknesses of each architecture pattern is neces‐ v sary in order to choose the one that meets your specific business needs and goals. As an architect, you must always justify your architecture decisions, particularly when it comes to choosing a particular architecture pat‐ tern or approach. The goal of this report is to give you enough infor‐ mation to make and justify that decision. vi | Introduction CHAPTER 1 Layered Architecture The most common architecture pattern is the layered architecture pattern, otherwise known as the n-tier architecture pattern. This pattern is the de facto standard for most Java EE applications and therefore is widely known by most architects, designers, and devel‐ opers. The layered architecture pattern closely matches the tradi‐ tional IT communication and organizational structures found in most companies, making it a natural choice for most business appli‐ cation development efforts. Pattern Description Components within the layered architecture pattern are organized into horizontal layers, each layer performing a specific role within the application (e.g., presentation logic or business logic). Although the layered architecture pattern does not specify the number and types of layers that must exist in the pattern, most layered architec‐ tures consist of four standard layers: presentation, business, persis‐ tence, and database (Figure 1-1). In some cases, the business layer and persistence layer are combined into a single business layer, par‐ ticularly when the persistence logic (e.g., SQL or HSQL) is embed‐ ded within the business layer components. Thus, smaller applications may have only three layers, whereas larger and more complex business applications may contain five or more layers. Each layer of the layered architecture pattern has a specific role and responsibility within the application. For example, a presentation layer would be responsible for handling all user interface and 1 browser communication logic, whereas a business layer would be responsible for executing specific business rules associated with the request. Each layer in the architecture forms an abstraction around the work that needs to be done to satisfy a particular business request. For example, the presentation layer doesn’t need to know or worry about how to get customer data; it only needs to display that information on a screen in particular format. Similarly, the business layer doesn’t need to be concerned about how to format customer data for display on a screen or even where the customer data is coming from; it only needs to get the data from the persis‐ tence layer, perform business logic against the data (e.g., calculate values or aggregate data), and pass that information up to the pre‐ sentation layer. Figure 1-1. Layered architecture pattern One of the powerful features of the layered architecture pattern is the separation of concerns among components. Components within a specific layer deal only with logic that pertains to that layer. For example, components in the presentation layer deal only with pre‐ sentation logic, whereas components residing in the business layer deal only with business logic. This type of component classification makes it easy to build effective roles and responsibility models into your architecture, and also makes it easy to develop, test, govern, and maintain applications using this architecture pattern due to well-defined component interfaces and limited component scope. 2 | Chapter 1: Layered Architecture Key Concepts Notice in Figure 1-2 that each of the layers in the architecture is marked as being closed. This is a very important concept in the lay‐ ered architecture pattern. A closed layer means that as a request moves from layer to layer, it must go through the layer right below it to get to the next layer below that one. For example, a request origi‐ nating from the presentation layer must first go through the busi‐ ness layer and then to the persistence layer before finally hitting the database layer. Figure 1-2. Closed layers and request access So why not allow the presentation layer direct access to either the persistence layer or database layer? After all, direct database access from the presentation layer is much faster than going through a bunch of unnecessary layers just to retrieve or save database infor‐ mation. The answer to this question lies in a key concept known as layers of isolation. The layers of isolation concept means that changes made in one layer of the architecture generally don’t impact or affect components in other layers: the change is isolated to the components within that layer, and possibly another associated layer (such as a persistence layer containing SQL). If you allow the presentation layer direct access to the persistence layer, then changes made to SQL within the Key Concepts | 3 persistence layer would impact both the business layer and the pre‐ sentation layer, thereby producing a very tightly coupled application with lots of interdependencies between components. This type of architecture then becomes very hard and expensive to change. The layers of isolation concept also means that each layer is inde‐ pendent of the other layers, thereby having little or no knowledge of the inner workings of other layers in the architecture. To understand the power and importance of this concept, consider a large refactor‐ ing effort to convert the presentation framework from JSP (Java Server Pages) to JSF (Java Server Faces). Assuming that the contracts (e.g., model) used between the presentation layer and the business layer remain the same, the business layer is not affected by the refac‐ toring and remains completely independent of the type of user- interface framework used by the presentation layer. While closed layers facilitate layers of isolation and therefore help isolate change within the architecture, there are times when it makes sense for certain layers to be open. For example, suppose you want to add a shared-services layer to an architecture containing com‐ mon service components accessed by components within the busi‐ ness layer (e.g., data and string utility classes or auditing and logging classes). Creating a services layer is usually a good idea in this case because architecturally it restricts access to the shared services to the business layer (and not the presentation layer). Without a separate layer, there is nothing architecturally that restricts the presentation layer from accessing these common services, making it difficult to govern this access restriction. In this example, the new services layer would likely reside below the business layer to indicate that components in this services layer are not accessible from the presentation layer. However, this presents a problem in that the business layer is now required to go through the services layer to get to the persistence layer, which makes no sense at all. This is an age-old problem with the layered architecture, and is solved by creating open layers within the architecture. As illustrated in Figure 1-3, the services layer in this case is marked as open, meaning requests are allowed to bypass this open layer and go directly to the layer below it. In the following example, since the services layer is open, the business layer is now allowed to bypass it and go directly to the persistence layer, which makes perfect sense. 4 | Chapter 1: Layered Architecture Figure 1-3. Open layers and request flow Leveraging the concept of open and closed layers helps define the relationship between architecture layers and request flows and also provides designers and developers with the necessary information to understand the various layer access restrictions within the architec‐ ture. Failure to document or properly communicate which layers in the architecture are open and closed (and why) usually results in tightly coupled and brittle architectures that are very difficult to test, maintain, and deploy. Pattern Example To illustrate how the layered architecture works, consider a request from a business user to retrieve customer information for a particu‐ lar individual as illustrated in Figure 1-4. The black arrows show the request flowing down to the database to retrieve the customer data, and the red arrows show the response flowing back up to the screen to display the data. In this example, the customer informa‐ tion consists of both customer data and order data (orders placed by the customer). Pattern Example | 5 The customer screen is responsible for accepting the request and dis‐ playing the customer information. It does not know where the data is, how it is retrieved, or how many database tables must be queries to get the data. Once the customer screen receives a request to get customer information for a particular individual, it then forwards that request onto the customer delegate module. This module is responsible for knowing which modules in the business layer can process that request and also how to get to that module and what data it needs (the contract). The customer object in the business layer is responsible for aggregating all of the information needed by the business request (in this case to get customer information). This module calls out to the customer dao (data access object) module in the persistence layer to get customer data, and also the order dao module to get order information. These modules in turn execute SQL statements to retrieve the corresponding data and pass it back up to the customer object in the business layer. Once the customer object receives the data, it aggregates the data and passes that infor‐ mation back up to the customer delegate, which then passes that data to the customer screen to be presented to the user. Figure 1-4. Layered architecture example From a technology perspective, there are literally dozens of ways these modules can be implemented. For example, in the Java plat‐ form, the customer screen can be a (JSF) Java Server Faces screen 6 | Chapter 1: Layered Architecture coupled with the customer delegate as the managed bean compo‐ nent. The customer object in the business layer can be a local Spring bean or a remote EJB3 bean. The data access objects illustrated in the previous example can be implemented as simple POJO’s (Plain Old Java Objects), MyBatis XML Mapper files, or even objects encapsulating raw JDBC calls or Hibernate queries. From a Micro‐ soft platform perspective, the customer screen can be an ASP (active server pages) module using the .NET framework to access C# mod‐ ules in the business layer, with the customer and order data access modules implemented as ADO (ActiveX Data Objects). Considerations The layered architecture pattern is a solid general-purpose pattern, making it a good starting point for most applications, particularly when you are not sure what architecture pattern is best suited for your application. However, there are a couple of things to consider from an architecture standpoint when choosing this pattern. The first thing to watch out for is what is known as the architecture sinkhole anti-pattern. This anti-pattern describes the situation where requests flow through multiple layers of the architecture as simple pass-through processing with little or no logic performed within each layer. For example, assume the presentation layer responds to a request from the user to retrieve customer data. The presentation layer passes the request to the business layer, which simply passes the request to the persistence layer, which then makes a simple SQL call to the database layer to retrieve the customer data. The data is then passed all the way back up the stack with no additional pro‐ cessing or logic to aggregate, calculate, or transform the data. Every layered architecture will have at least some scenarios that fall into the architecture sinkhole anti-pattern. The key, however, is to analyze the percentage of requests that fall into this category. The 80-20 rule is usually a good practice to follow to determine whether or not you are experiencing the architecture sinkhole anti-pattern. It is typical to have around 20 percent of the requests as simple pass- through processing and 80 percent of the requests having some business logic associated with the request. However, if you find that this ratio is reversed and a majority of your requests are simple pass- through processing, you might want to consider making some of the Considerations | 7 architecture layers open, keeping in mind that it will be more diffi‐ cult to control change due to the lack of layer isolation. Another consideration with the layered architecture pattern is that it tends to lend itself toward monolithic applications, even if you split the presentation layer and business layers into separate deployable units. While this may not be a concern for some applications, it does pose some potential issues in terms of deployment, general robust‐ ness and reliability, performance, and scalability. Pattern Analysis The following table contains a rating and analysis of the common architecture characteristics for the layered architecture pattern. The rating for each characteristic is based on the natural tendency for that characteristic as a capability based on a typical implementa‐ tion of the pattern, as well as what the pattern is generally known for. For a side-by-side comparison of how this pattern relates to other patterns in this report, please refer to Appendix A at the end of this report. Overall agility Rating: Low Analysis: Overall agility is the ability to respond quickly to a constantly changing environment. While change can be isolated through the layers of isolation feature of this pattern, it is still cumbersome and time-consuming to make changes in this architecture pattern because of the monolithic nature of most implementations as well as the tight coupling of components usually found with this pattern. Ease of deployment Rating: Low Analysis: Depending on how you implement this pattern, deployment can become an issue, particularly for larger applica‐ tions. One small change to a component can require a redeployment of the entire application (or a large portion of the application), resulting in deployments that need to be planned, scheduled, and executed during off-hours or on weekends. As such, this pattern does not easily lend itself toward a contin‐ uous delivery pipeline, further reducing the overall rating for deployment. 8 | Chapter 1: Layered Architecture Testability Rating: High Analysis: Because components belong to specific layers in the architecture, other layers can be mocked or stubbed, making this pattern is relatively easy to test. A developer can mock a presentation component or screen to isolate testing within a business component, as well as mock the business layer to test certain screen functionality. Performance Rating: Low Analysis: While it is true some layered architectures can per‐ form well, the pattern does not lend itself to high-performance applications due to the inefficiencies of having to go through multiple layers of the architecture to fulfill a business request. Scalability Rating: Low Analysis: Because of the trend toward tightly coupled and mon‐ olithic implementations of this pattern, applications build using this architecture pattern are generally difficult to scale. You can scale a layered architecture by splitting the layers into separate physical deployments or replicating the entire application into multiple nodes, but overall the granularity is too broad, making it expensive to scale. Ease of development Rating: High Analysis: Ease of development gets a relatively high score, mostly because this pattern is so well known and is not overly complex to implement. Because most companies develop appli‐ cations by separating skill sets by layers (presentation, business, database), this pattern becomes a natural choice for most business-application development. The connection between a company’s communication and organization structure and the way it develops software is outlined is what is called Conway’s law. You can Google “Conway’s law" to get more information about this fascinating correlation. Pattern Analysis | 9 CHAPTER 2 Event-Driven Architecture The event-driven architecture pattern is a popular distributed asynchronous architecture pattern used to produce highly scalable applications. It is also highly adaptable and can be used for small applications and as well as large, complex ones. The event-driven architecture is made up of highly decoupled, single-purpose event processing components that asynchronously receive and process events. The event-driven architecture pattern consists of two main topolo‐ gies, the mediator and the broker. The mediator topology is com‐ monly used when you need to orchestrate multiple steps within an event through a central mediator, whereas the broker topology is used when you want to chain events together without the use of a central mediator. Because the architecture characteristics and imple‐ mentation strategies differ between these two topologies, it is impor‐ tant to understand each one to know which is best suited for your particular situation. Mediator Topology The mediator topology is useful for events that have multiple steps and require some level of orchestration to process the event. For example, a single event to place a stock trade might require you to first validate the trade, then check the compliance of that stock trade against various compliance rules, assign the trade to a broker, calcu‐ late the commission, and finally place the trade with that broker. All of these steps would require some level of orchestration to deter‐ 11 mine the order of the steps and which ones can be done serially and in parallel. There are four main types of architecture components within the mediator topology: event queues, an event mediator, event channels, and event processors. The event flow starts with a client sending an event to an event queue, which is used to transport the event to the event mediator. The event mediator receives the initial event and orchestrates that event by sending additional asynchronous events to event channels to execute each step of the process. Event process‐ ors, which listen on the event channels, receive the event from the event mediator and execute specific business logic to process the event. Figure 2-1 illustrates the general mediator topology of the event-driven architecture pattern. Figure 2-1. Event-driven architecture mediator topology It is common to have anywhere from a dozen to several hundred event queues in an event-driven architecture. The pattern does not specify the implementation of the event queue component; it can be a message queue, a web service endpoint, or any combination thereof. There are two types of events within this pattern: an initial event and a processing event. The initial event is the original event received by 12 | Chapter 2: Event-Driven Architecture the mediator, whereas the processing events are ones that are generated by the mediator and received by the event-processing components. The event-mediator component is responsible for orchestrating the steps contained within the initial event. For each step in the ini‐ tial event, the event mediator sends out a specific processing event to an event channel, which is then received and processed by the event processor. It is important to note that the event mediator doesn’t actually perform the business logic necessary to process the initial event; rather, it knows of the steps required to process the ini‐ tial event. Event channels are used by the event mediator to asynchronously pass specific processing events related to each step in the initial event to the event processors. The event channels can be either mes‐ sage queues or message topics, although message topics are most widely used with the mediator topology so that processing events can be processed by multiple event processors (each performing a different task based on the processing event received). The event processor components contain the application business logic necessary to process the processing event. Event processors are self-contained, independent, highly decoupled architecture compo‐ nents that perform a specific task in the application or system. While the granularity of the event-processor component can vary from fine-grained (e.g., calculate sales tax on an order) to coarse- grained (e.g., process an insurance claim), it is important to keep in mind that in general, each event-processor component should per‐ form a single business task and not rely on other event processors to complete its specific task. The event mediator can be implemented in a variety of ways. As an architect, you should understand each of these implementation options to ensure that the solution you choose for the event media‐ tor matches your needs and requirements. The simplest and most common implementation of the event medi‐ ator is through open source integration hubs such as Spring Integra‐ tion, Apache Camel, or Mule ESB. Event flows in these open source integration hubs are typically implemented through Java code or a DSL (domain-specific language). For more sophisticated mediation and orchestration, you can use BPEL (business process execution language) coupled with a BPEL engine such as the open source Mediator Topology | 13 Apache ODE. BPEL is a standard XML-like language that describes the data and steps required for processing an initial event. For very large applications requiring much more sophisticated orchestration (including steps involving human interactions), you can implement the event mediator using a business process manager (BPM) such as jBPM. Understanding your needs and matching them to the correct event mediator implementation is critical to the success of any event- driven architecture using this topology. Using an open source inte‐ gration hub to do very complex business process management orchestration is a recipe for failure, just as is implementing a BPM solution to perform simple routing logic. To illustrate how the mediator topology works, suppose you are insured through an insurance company and you decide to move. In this case, the initial event might be called something like relocation event. The steps involved in processing a relocation event are con‐ tained within the event mediator as shown in Figure 2-2. For each initial event step, the event mediator creates a processing event (e.g., change address, recalc quote, etc.), sends that processing event to the event channel and waits for the processing event to be processed by the corresponding event processor (e.g., customer process, quote process, etc.). This process continues until all of the steps in the ini‐ tial event have been processed. The single bar over the recalc quote and update claims steps in the event mediator indicates that these steps can be run at the same time. Broker Topology The broker topology differs from the mediator topology in that there is no central event mediator; rather, the message flow is dis‐ tributed across the event processor components in a chain-like fashion through a lightweight message broker (e.g., ActiveMQ, HornetQ, etc.). This topology is useful when you have a relatively simple event processing flow and you do not want (or need) central event orchestration. There are two main types of architecture components within the broker topology: a broker component and an event processor compo‐ nent. The broker component can be centralized or federated and contains all of the event channels that are used within the event flow. 14 | Chapter 2: Event-Driven Architecture The event channels contained within the broker component can be message queues, message topics, or a combination of both. Figure 2-2. Mediator topology example This topology is illustrated in Figure 2-3. As you can see from the diagram, there is no central event-mediator component controlling and orchestrating the initial event; rather, each event-processor component is responsible for processing an event and publishing a new event indicating the action it just performed. For example, an event processor that balances a portfolio of stocks may receive an initial event called stock split. Based on that initial event, the event processor may do some portfolio rebalancing, and then publish a new event to the broker called rebalance portfolio, which would then be picked up by a different event processor. Note that there may be times when an event is published by an event processor but not picked up by any another event processor. This is common when you are evolving an application or providing for future functionality and extensions. Broker Topology | 15 Figure 2-3. Event-driven architecture broker topology To illustrate how the broker topology works, we’ll use the same example as in the mediator topology (an insured person moves). Since there is no central event mediator to receive the initial event in the broker topology, the customer-process component receives the event directly, changes the customer address, and sends out an event saying it changed a customer’s address (e.g., change address event). In this example, there are two event processors that are interested in the change address event: the quote process and the claims process. The quote processor component recalculates the new auto- insurance rates based on the address change and publishes an event to the rest of the system indicating what it did (e.g., recalc quote event). The claims processing component, on the other hand, receives the same change address event, but in this case, it updates an outstanding insurance claim and publishes an event to the system as an update claim event. These new events are then picked up by other event processor components, and the event chain continues through the system until there are no more events are published for that par‐ ticular initiating event. 16 | Chapter 2: Event-Driven Architecture Figure 2-4. Broker topology example As you can see from Figure 2-4, the broker topology is all about the chaining of events to perform a business function. The best way to understand the broker topology is to think about it as a relay race. In a relay race, runners hold a baton and run for a certain distance, then hand off the baton to the next runner, and so on down the chain until the last runner crosses the finish line. In relay races, once a runner hands off the baton, she is done with the race. This is also true with the broker topology: once an event processor hands off the event, it is no longer involved with the processing of that spe‐ cific event. Considerations The event-driven architecture pattern is a relatively complex pattern to implement, primarily due to its asynchronous distributed nature. When implementing this pattern, you must address various dis‐ tributed architecture issues, such as remote process availability, lack of responsiveness, and broker reconnection logic in the event of a broker or mediator failure. Considerations | 17 One consideration to take into account when choosing this architec‐ ture pattern is the lack of atomic transactions for a single business process. Because event processor components are highly decoupled and distributed, it is very difficult to maintain a transactional unit of work across them. For this reason, when designing your application using this pattern, you must continuously think about which events can and can’t run independently and plan the granu‐ larity of your event processors accordingly. If you find that you need to split a single unit of work across event processors—that is, if you are using separate processors for something that should be an undivided transaction—this is probably not the right pattern for your application. Perhaps one of the most difficult aspects of the event-driven archi‐ tecture pattern is the creation, maintenance, and governance of the event-processor component contracts. Each event usually has a spe‐ cific contract associated with it (e.g., the data values and data format being passed to the event processor). It is vitally important when using this pattern to settle on a standard data format (e.g., XML, JSON, Java Object, etc.) and establish a contract versioning policy right from the start. Pattern Analysis The following table contains a rating and analysis of the common architecture characteristics for the event-driven architecture pattern. The rating for each characteristic is based on the natural tendency for that characteristic as a capability based on a typical implementa‐ tion of the pattern, as well as what the pattern is generally known for. For a side-by-side comparison of how this pattern relates to other patterns in this report, please refer to Appendix A at the end of this report. Overall agility Rating: High Analysis: Overall agility is the ability to respond quickly to a constantly changing environment. Since event-processor com‐ ponents are single-purpose and completely decoupled from other event processor components, changes are generally iso‐ lated to one or a few event processors and can be made quickly without impacting other components. 18 | Chapter 2: Event-Driven Architecture Ease of deployment Rating: High Analysis: Overall this pattern is relatively easy to deploy due to the decoupled nature of the event-processor components. The broker topology tends to be easier to deploy than the mediator topology, primarily because the event mediator com‐ ponent is somewhat tightly coupled to the event processors: a change in an event processor component might also require a change in the event mediator, requiring both to be deployed for any given change. Testability Rating: Low Analysis: While individual unit testing is not overly difficult, it does require some sort of specialized testing client or testing tool to generate events. Testing is also complicated by the asyn‐ chronous nature of this pattern. Performance Rating: High Analysis: While it is certainly possible to implement an event- driven architecture that does not perform well due to all the messaging infrastructure involved, in general, the pattern ach‐ ieves high performance through its asynchronous capabili‐ ties; in other words, the ability to perform decoupled, parallel asynchronous operations outweighs the cost of queuing and dequeuing messages. Scalability Rating: High Analysis: Scalability is naturally achieved in this pattern through highly independent and decoupled event processors. Each event processor can be scaled separately, allowing for fine-grained scalability. Ease of development Rating: Low Analysis: Development can be somewhat complicated due to the asynchronous nature of the pattern as well as contract cre‐ ation and the need for more advanced error handling condi‐ tions within the code for unresponsive event processors and failed brokers. Pattern Analysis | 19 CHAPTER 3 Microkernel Architecture The microkernel architecture pattern (sometimes referred to as the plug-in architecture pattern) is a natural pattern for implementing product-based applications. A product-based application is one that is packaged and made available for download in versions as a typical third-party product. However, many companies also develop and release their internal business applications like software products, complete with versions, release notes, and pluggable features. These are also a natural fit for this pattern. The microkernel architecture pattern allows you to add additional application features as plug-ins to the core application, providing extensibility as well as feature sep‐ aration and isolation. Pattern Description The microkernel architecture pattern consists of two types of archi‐ tecture components: a core system and plug-in modules. Application logic is divided between independent plug-in modules and the basic core system, providing extensibility, flexibility, and isolation of application features and custom processing logic. Figure 3-1 illus‐ trates the basic microkernel architecture pattern. The core system of the microkernel architecture pattern tradition‐ ally contains only the minimal functionality required to make the system operational. Many operating systems implement the micro‐ kernel architecture pattern, hence the origin of this pattern’s name. From a business-application perspective, the core system is often 21 defined as the general business logic sans custom code for special cases, special rules, or complex conditional processing. Figure 3-1. Microkernel architecture pattern The plug-in modules are stand-alone, independent components that contain specialized processing, additional features, and custom code that is meant to enhance or extend the core system to produce addi‐ tional business capabilities. Generally, plug-in modules should be independent of other plug-in modules, but you can certainly design plug-ins that require other plug-ins to be present. Either way, it is important to keep the communication between plug-ins to a mini‐ mum to avoid dependency issues. The core system needs to know about which plug-in modules are available and how to get to them. One common way of implement‐ ing this is through some sort of plug-in registry. This registry con‐ tains information about each plug-in module, including things like its name, data contract, and remote access protocol details (depend‐ ing on how the plug-in is connected to the core system). For exam‐ ple, a plug-in for tax software that flags high-risk tax audit items might have a registry entry that contains the name of the service (AuditChecker), the data contract (input data and output data), and the contract format (XML). It might also contain a WSDL (Web Services Definition Language) if the plug-in is accessed through SOAP. Plug-in modules can be connected to the core system through a variety of ways, including OSGi (open service gateway initiative), messaging, web services, or even direct point-to-point binding (i.e., object instantiation). The type of connection you use depends on the type of application you are building (small product or large busi‐ ness application) and your specific needs (e.g., single deploy or dis‐ 22 | Chapter 3: Microkernel Architecture tributed deployment). The architecture pattern itself does not specify any of these implementation details, only that the plug-in modules must remain independent from one another. The contracts between the plug-in modules and the core system can range anywhere from standard contracts to custom ones. Custom contracts are typically found in situations where plug-in compo‐ nents are developed by a third party where you have no control over the contract used by the plug-in. In such cases, it is common to cre‐ ate an adapter between the plug-in contact and your standard con‐ tract so that the core system doesn’t need specialized code for each plug-in. When creating standard contracts (usually implemented through XML or a Java Map), it is important to remember to create a versioning strategy right from the start. Pattern Examples Perhaps the best example of the microkernel architecture is the Eclipse IDE. Downloading the basic Eclipse product provides you little more than a fancy editor. However, once you start adding plug-ins, it becomes a highly customizable and useful product. Internet browsers are another common product example using the microkernel architecture: viewers and other plug-ins add additional capabilities that are not otherwise found in the basic browser (i.e., core system). The examples are endless for product-based software, but what about large business applications? The microkernel architecture applies to these situations as well. To illustrate this point, let’s use another insurance company example, but this time one involving insurance claims processing. Claims processing is a very complicated process. Each state has dif‐ ferent rules and regulations for what is and isn’t allowed in an insur‐ ance claim. For example, some states allow free windshield replacement if your windshield is damaged by a rock, whereas other states do not. This creates an almost infinite set of conditions for a standard claims process. Not surprisingly, most insurance claims applications leverage large and complex rules engines to handle much of this complexity. How‐ ever, these rules engines can grow into a complex big ball of mud where changing one rule impacts other rules, or making a Pattern Examples | 23 simple rule change requires an army of analysts, developers, and testers. Using the microkernel architecture pattern can solve many of these issues. The stack of folders you see in Figure 3-2 represents the core system for claims processing. It contains the basic business logic required by the insurance company to process a claim, except without any custom processing. Each plug-in module contains the specific rules for that state. In this example, the plug-in modules can be imple‐ mented using custom source code or separate rules engine instances. Regardless of the implementation, the key point is that state-specific rules and processing is separate from the core claims system and can be added, removed, and changed with little or no effect on the rest of the core system or other plug-in modules. Figure 3-2. Microkernel architecture example Considerations One great thing about the microkernel architecture pattern is that it can be embedded or used as part of another architecture pattern. For example, if this pattern solves a particular problem you have with a specific volatile area of the application, you might find that you can’t implement the entire architecture using this pattern. In this case, you can embed the microservices architecture pattern in another pattern you are using (e.g., layered architecture). Similarly, the event-processor components described in the previous section on event-driven architecture could be implemented using the microservices architecture pattern. The microservices architecture pattern provides great support for evolutionary design and incremental development. You can first produce a solid core system, and as the application evolves incre‐ 24 | Chapter 3: Microkernel Architecture mentally, add features and functionality without having to make sig‐ nificant changes to the core system. For product-based applications, the microkernel architecture pat‐ tern should always be your first choice as a starting architecture, particularly for those products where you will be releasing addi‐ tional features over time and want control over which users get which features. If you find over time that the pattern doesn’t sat‐ isfy all of your requirements, you can always refactor your applica‐ tion to another architecture pattern better suited for your specific requirements. Pattern Analysis The following table contains a rating and analysis of the common architecture characteristics for the microkernel architecture pattern. The rating for each characteristic is based on the natural tendency for that characteristic as a capability based on a typical implementa‐ tion of the pattern, as well as what the pattern is generally known for. For a side-by-side comparison of how this pattern relates to other patterns in this report, please refer to Appendix A at the end of this report. Overall agility Rating: High Analysis: Overall agility is the ability to respond quickly to a constantly changing environment. Changes can largely be iso‐ lated and implemented quickly through loosely coupled plug-in modules. In general, the core system of most microkernel archi‐ tectures tends to become stable quickly, and as such is fairly robust and requires few changes over time. Ease of deployment Rating: High Analysis: Depending on how the pattern is implemented, the plug-in modules can be dynamically added to the core sys‐ tem at runtime (e.g., hot-deployed), minimizing downtime dur‐ ing deployment. Pattern Analysis | 25 Testability Rating: High Analysis: Plug-in modules can be tested in isolation and can be easily mocked by the core system to demonstrate or prototype a particular feature with little or no change to the core system. Performance Rating: High Analysis: While the microkernel pattern does not naturally lend itself to high-performance applications, in general, most appli‐ cations built using the microkernel architecture pattern perform well because you can customize and streamline applications to only include those features you need. The JBoss Application Server is a good example of this: with its plug-in architecture, you can trim down the application server to only those features you need, removing expensive non-used features such as remote access, messaging, and caching that consume memory, CPU, and threads and slow down the app server. Scalability Rating: Low Analysis: Because most microkernel architecture implementa‐ tions are product based and are generally smaller in size, they are implemented as single units and hence not highly scalable. Depending on how you implement the plug-in modules, you can sometimes provide scalability at the plug-in feature level, but overall this pattern is not known for producing highly scala‐ ble applications. Ease of development Rating: Low Analysis: The microkernel architecture requires thoughtful design and contract governance, making it rather complex to implement. Contract versioning, internal plug-in registries, plug-in granularity, and the wide choices available for plug-in connectivity all contribute to the complexity involved with implementing this pattern. 26 | Chapter 3: Microkernel Architecture CHAPTER 4 Microservices Architecture Pattern The microservices architecture pattern is quickly gaining ground in the industry as a viable alternative to monolithic applications and service-oriented architectures. Because this architecture pattern is still evolving, there’s a lot of confusion in the industry about what this pattern is all about and how it is implemented. This section of the report will provide you with the key concepts and foundational knowledge necessary to understand the benefits (and trade-offs) of this important architecture pattern and whether it is the right pat‐ tern for your application. Pattern Description Regardless of the topology or implementation style you chose, there are several common core concepts that apply to the general architec‐ ture pattern. The first of these concepts is the notion of separately deployed units. As illustrated in Figure 4-1, each component of the microservices architecture is deployed as a separate unit, allowing for easier deployment through an effective and streamlined delivery pipeline, increased scalability, and a high degree of application and component decoupling within your application. Perhaps the most important concept to understand with this pattern is the notion of a service component. Rather than think about serv‐ ices within a microservices architecture, it is better to think about service components, which can vary in granularity from a single module to a large portion of the application. Service components contain one or more modules (e.g., Java classes) that represent either 27 a single-purpose function (e.g., providing the weather for a specific city or town) or an independent portion of a large business applica‐ tion (e.g., stock trade placement or determining auto-insurance rates). Designing the right level of service component granularity is one of the biggest challenges within a microservices architecture. This challenge is discussed in more detail in the following service- component orchestration subsection. Figure 4-1. Basic Microservices architecture pattern Another key concept within the microservices architecture pattern is that it is a distributed architecture, meaning that all the compo‐ nents within the architecture are fully decoupled from one other and accessed through some sort of remote access protocol (e.g., JMS, AMQP, REST, SOAP, RMI, etc.). The distributed nature of this architecture pattern is how it achieves some of its superior scalabil‐ ity and deployment characteristics. One of the exciting things about the microservices architecture is that it evolved from issues associated with other common architec‐ ture patterns, rather than being created as a solution waiting for a problem to occur. The microservices architecture style naturally evolved from two main sources: monolithic applications developed using the layered architecture pattern and distributed applications developed through the service-oriented architecture pattern. The evolutionary path from monolithic applications to a microser‐ vices architecture style was prompted primarily through the devel‐ opment of continuous delivery, the notion of a continuous 28 | Chapter 4: Microservices Architecture Pattern deployment pipeline from development to production which streamlines the deployment of applications. Monolithic applications typically consist of tightly coupled components that are part of a sin‐ gle deployable unit, making it cumbersome and difficult to change, test, and deploy the application (hence the rise of the common “monthly deployment” cycles typically found in most large IT shops). These factors commonly lead to brittle applications that break every time something new is deployed. The microservices architecture pattern addresses these issues by separating the applica‐ tion into multiple deployable units (service components) that can be individually developed, tested, and deployed independent of other service components. The other evolutionary path that lead to the microservices architec‐ ture pattern is from issues found with applications implementing the service-oriented architecture pattern (SOA). While the SOA pat‐ tern is very powerful and offers unparalleled levels of abstraction, heterogeneous connectivity, service orchestration, and the promise of aligning business goals with IT capabilities, it is nevertheless com‐ plex, expensive, ubiquitous, difficult to understand and implement, and is usually overkill for most applications. The microservices architecture style addresses this complexity by simplifying the notion of a service, eliminating orchestration needs, and simplifying connectivity and access to service components. Pattern Topologies While there are literally dozens of ways to implement a microservi‐ ces architecture pattern, three main topologies stand out as the most common and popular: the API REST-based topology, application REST-based topology, and the centralized messaging topology. The API REST-based topology is useful for websites that expose small, self-contained individual services through some sort of API (application programming interface). This topology, which is illustrated in Figure 4-2, consists of very fine-grained service com‐ ponents (hence the name microservices) that contain one or two modules that perform specific business functions independent from the rest of the services. In this topology, these fine-grained service components are typically accessed using a REST-based interface implemented through a separately deployed web-based API layer. Examples of this topology include some of the common single- Pattern Topologies | 29 purpose cloud-based RESTful web services found by Yahoo, Google, and Amazon. Figure 4-2. API REST-based topology The application REST-based topology differs from the API REST- based approach in that client requests are received through tradi‐ tional web-based or fat-client business application screens rather than through a simple API layer. As illustrated in Figure 4-3, the user-interface layer of the application is deployed as a separate web application that remotely accesses separately deployed service com‐ ponents (business functionality) through simple REST-based inter‐ faces. The service components in this topology differ from those in the API-REST-based topology in that these service components tend to be larger, more coarse-grained, and represent a small portion of the overall business application rather than fine-grained, single- action services. This topology is common for small to medium-sized business applications that have a relatively low degree of complexity. 30 | Chapter 4: Microservices Architecture Pattern Figure 4-3. Application REST-based topology Another common approach within the microservices architecture pattern is the centralized messaging topology. This topology (illus‐ trated in Figure 4-4) is similar to the previous application REST- based topology except that instead of using REST for remote access, this topology uses a lightweight centralized message broker (e.g., ActiveMQ, HornetQ, etc.). It is vitally important when looking at this topology not to confuse it with the service-oriented architecture pattern or consider it “SOA-Lite." The lightweight message broker found in this topology does not perform any orchestration, transfor‐ mation, or complex routing; rather, it is just a lightweight transport to access remote service components. The centralized messaging topology is typically found in larger busi‐ ness applications or applications requiring more sophisticated con‐ trol over the transport layer between the user interface and the service components. The benefits of this topology over the simple REST-based topology discussed previously are advanced queuing mechanisms, asynchronous messaging, monitoring, error handling, and better overall load balancing and scalability. The single point of failure and architectural bottleneck issues usually associated with a centralized broker are addressed through broker clustering and broker federation (splitting a single broker instance into multiple broker instances to divide the message throughput load based on functional areas of the system). Pattern Topologies | 31 Figure 4-4. Centralized messaging topology Avoid Dependencies and Orchestration One of the main challenges of the microservices architecture pattern is determining the correct level of granularity for the service compo‐ nents. If service components are too coarse-grained you may not realize the benefits that come with this architecture pattern (deploy‐ ment, scalability, testability, and loose coupling). However, service components that are too fine-grained will lead to service orchestra‐ tion requirements, which will quickly turn your lean microservices architecture into a heavyweight service-oriented architecture, com‐ plete with all the complexity, confusion, expense, and fluff typically found with SOA-based applications. If you find you need to orchestrate your service components from within the user interface or API layer of the application, then chan‐ ces are your service components are too fine-grained. Similarly, if you find you need to perform inter-service communication between service components to process a single request, chances are your service components are either too fine-grained or they are not parti‐ tioned correctly from a business functionality standpoint. Inter-service communication, which could force undesired cou‐ plings between components, can be handled instead through a 32 | Chapter 4: Microservices Architecture Pattern shared database. For example, if a service component handing Inter‐ net orders needs customer information, it can go to the database to retrieve the necessary data as opposed to invoking functionality within the customer-service component. The shared database can handle information needs, but what about shared functionality? If a service component needs functionality contained within another service component or common to all ser‐ vice components, you can sometimes copy the shared functionality across service components (thereby violating the DRY princi‐ ple: don’t repeat yourself). This is a fairly common practice in most business applications implementing the microservices architecture pattern, trading off the redundancy of repeating small portions of business logic for the sake of keeping service components independ‐ ent and separating their deployment. Small utility classes might fall into this category of repeated code. If you find that regardless of the level of service component granu‐ larity you still cannot avoid service-component orchestration, then it’s a good sign that this might not be the right architecture pattern for your application. Because of the distributed nature of this pat‐ tern, it is very difficult to maintain a single transactional unit of work across (and between) service components. Such a practice would require some sort of transaction compensation framework for rolling back transactions, which adds significant complexity to this relatively simple and elegant architecture pattern. Considerations The microservices architecture pattern solves many of the common issues found in both monolithic applications as well as service- oriented architectures. Since major application components are split up into smaller, separately deployed units, applications built using the microservices architecture pattern are generally more robust, provide better scalability, and can more easily support con‐ tinuous delivery. Another advantage of this pattern is that it provides the capability to do real-time production deployments, thereby significantly reducing the need for the traditional monthly or weekend “big bang” produc‐ tion deployments. Since change is generally isolated to specific ser‐ vice components, only the service components that change need to be deployed. If you only have a single instance of a service com‐ Considerations | 33 ponent, you can write specialized code in the user interface applica‐ tion to detect an active hot-deployment and redirect users to an error page or waiting page. Alternatively, you can swap multiple instances of a service component in and out during a real-time deployment, allowing for continuous availability during deployment cycles (something that is very difficult to do with the layered archi‐ tecture pattern). One final consideration to take into account is that since the micro‐ services architecture pattern is a distributed architecture, it shares some of the same complex issues found in the event-driven architec‐ ture pattern, including contract creation, maintenance, and govern‐ ment, remote system availability, and remote access authentication and authorization. Pattern Analysis The following table contains a rating and analysis of the common architecture characteristics for the microservices architecture pat‐ tern. The rating for each characteristic is based on the natural ten‐ dency for that characteristic as a capability based on a typical implementation of the pattern, as well as what the pattern is gener‐ ally known for. For a side-by-side comparison of how this pattern relates to other patterns in this report, please refer to Appendix A at the end of this report. Overall agility Rating: High Analysis: Overall agility is the ability to respond quickly to a constantly changing environment. Due to the notion of sepa‐ rately deployed units, change is generally isolated to individual service components, which allows for fast and easy deployment. Also, applications build using this pattern tend to be very loosely coupled, which also helps facilitate change. Ease of deployment Rating: High Analysis: Overall this pattern is relatively easy to deploy due to the decoupled nature of the event-processor components. The broker topology tends to be easier to deploy than the mediator topology, primarily because the event-mediator component is somewhat tightly coupled to the event processors: a change in an event processor component might also require a change in 34 | Chapter 4: Microservices Architecture Pattern the event mediator, requiring both to be deployed for any given change. Testability Rating: High Analysis: Due to the separation and isolation of business func‐ tionality into independent applications, testing can be scoped, allowing for more targeted testing efforts. Regression testing for a particular service component is much easier and more feasible than regression testing for an entire monolithic application. Also, since the service components in this pattern are loosely coupled, there is much less of a chance from a development per‐ spective of making a change that breaks another part of the application, easing the testing burden of having to test the entire application for one small change. Performance Rating: Low Analysis: While you can create applications implemented from this pattern that perform very well, overall this pattern does not naturally lend itself to high-performance applications due to the distributed nature of the microservices architecture pattern. Scalability Rating: High Analysis: Because the application is split into separately deployed units, each service component can be individually scaled, allowing for fine-tuned scaling of the application. For example, the admin area of a stock-trading application may not need to scale due to the low user volumes for that functionality, but the trade-placement service component may need to scale due to the high throughput needed by most trading applications for this functionality. Ease of development Rating: High Analysis: Because functionality is isolated into separate and dis‐ tinct service components, development becomes easier due to the smaller and isolated scope. There is much less chance a developer will make a change in one service component that would affect other service components, thereby reducing the coordination needed among developers or development teams. Pattern Analysis | 35 CHAPTER 5 Space-Based Architecture Most web-based business applications follow the same general request flow: a request from a browser hits the web server, then an application server, then finally the database server. While this pat‐ tern works great for a small set of users, bottlenecks start appearing as the user load increases, first at the web-server layer, then at the application-server layer, and finally at the database-server layer. The usual response to bottlenecks based on an increase in user load is to scale out the web servers. This is relatively easy and inexpensive, and sometimes works to address the bottleneck issues. However, in most cases of high user load, scaling out the web-server layer just moves the bottleneck down to the application server. Scaling application servers can be more complex and expensive than web servers and usually just moves the bottleneck down to the database server, which is even more difficult and expensive to scale. Even if you can scale the database, what you eventually end up with is a triangle- shaped topology, with the widest part of the triangle being the web servers (easiest to scale) and the smallest part being the database (hardest to scale). In any high-volume application with an extremely large concurrent user load, the database will usually be the final limiting factor in how many transactions you can process concurrently. While various caching technologies and database scaling products help to address these issues, the fact remains that scaling out a normal application for extreme loads is a very difficult proposition. 37 The space-based architecture pattern is specifically designed to address and solve scalability and concurrency issues. It is also a use‐ ful architecture pattern for applications that have variable and unpredictable concurrent user volumes. Solving the extreme and variable scalability issue architecturally is often a better approach than trying to scale out a database or retrofit caching technologies into a non-scalable architecture. Pattern Description The space-based pattern (also sometimes referred to as the cloud architecture pattern) minimizes the factors that limit application scaling. This pattern gets its name from the concept of tuple space, the idea of distributed shared memory. High scalability is achieved by removing the central database constraint and using replicated in-memory data grids instead. Application data is kept in- memory and replicated among all the active processing units. Pro‐ cessing units can be dynamically started up and shut down as user load increases and decreases, thereby addressing variable scalabil‐ ity. Because there is no central database, the database bottleneck is removed, providing near-infinite scalability within the application. Most applications that fit into this pattern are standard websites that receive a request from a browser and perform some sort of action. A bidding auction site is a good example of this. The site continually receives bids from internet users through a browser request. The application would receive a bid for a particular item, record that bid with a timestamp, and update the latest bid information for the item, and send the information back to the browser. There are two primary components within this architecture pat‐ tern: a processing unit and virtualized middleware. Figure 5-1 illus‐ trates the basic space-based architecture pattern and its primary architecture components. The processing-unit component contains the application compo‐ nents (or portions of the application components). This includes web-based components as well as backend business logic. The con‐ tents of the processing unit varies based on the type of application— smaller web-based applications would likely be deployed into a sin‐ gle processing unit, whereas larger applications may split the appli‐ cation functionality into multiple processing units based on the functional areas of the application. The processing unit typically 38 | Chapter 5: Space-Based Architecture contains the application modules, along with an in-memory data grid and an optional asynchronous persistent store for failover. It also contains a replication engine that is used by the virtualized mid‐ dleware to replicate data changes made by one processing unit to other active processing units. Figure 5-1. Space-based architecture pattern The virtualized-middleware component handles housekeeping and communications. It contains components that control various aspects of data synchronization and request handling. Included in the virtualized middleware are the messaging grid, data grid, pro‐ cessing grid, and deployment manager. These components, which are described in detail in the next section, can be custom written or purchased as third-party products. Pattern Dynamics The magic of the space-based architecture pattern lies in the virtual‐ ized middleware components and the in-memory data grid con‐ tained within each processing unit. Figure 5-2 shows the typical processing unit architecture containing the application modules, in- memory data grid, optional asynchronous persistence store for fail‐ over, and the data-replication engine. The virtualized middleware is essentially the controller for the archi‐ tecture and manages requests, sessions, data replication, distributed request processing, and process-unit deployment. There are four main architecture components in the virtualized middleware: the Pattern Dynamics | 39 messaging grid, the data grid, the processing grid, and the deploy‐ ment manager. Figure 5-2. Processing-unit component Messaging Grid The messaging grid, shown in Figure 5-3, manages input request and session information. When a request comes into the virtualized- middleware component, the messaging-grid component determines which active processing components are available to receive the request and forwards the request to one of those processing units. The complexity of the messaging grid can range from a simple round-robin algorithm to a more complex next-available algorithm that keeps track of which request is being processed by which pro‐ cessing unit. Data Grid The data-grid component is perhaps the most important and crucial component in this pattern. The data grid interacts with the data- replication engine in each processing unit to manage the data repli‐ cation between processing units when data updates occur. Since the messaging grid can forward a request to any of the processing units available, it is essential that each processing unit contains exactly the same data in its in-memory data grid. Although Figure 5-4 shows a synchronous data replication between processing units, in reality this is done in parallel asynchronously and very quickly, sometimes completing the data synchronization in a matter of microseconds (one millionth of a second). 40 | Chapter 5: Space-Based Architecture Figure 5-3. Messaging-grid component Figure 5-4. Data-grid component Processing Grid The processing grid, illustrated in Figure 5-5, is an optional compo‐ nent within the virtualized middleware that manages distributed request processing when there are multiple processing units, each handling a portion of the application. If a request comes in that requires coordination between processing unit types (e.g., an order processing unit and a customer processing unit), it is the processing Pattern Dynamics | 41 grid that mediates and orchestrates the request between those two processing units. Figure 5-5. Processing-grid component Deployment Manager The deployment-manager component manages the dynamic startup and shutdown of processing units based on load conditions. This component continually monitors response times and user loads, and starts up new processing units when load increases, and shuts down processing units when the load decreases. It is a critical component to achieving variable scalability needs within an application. Considerations The space-based architecture pattern is a complex and expensive pattern to implement. It is a good architecture choice for smaller web-based applications with variable load (e.g., social media sites, bidding and auction sites). However, it is not well suited for tradi‐ tional large-scale relational database applications with large amounts of operational data. Although the space-based architecture pattern does not require a centralized datastore, one is commonly included to perform the ini‐ tial in-memory data grid load and asynchronously persist data updates made by the processing units. It is also a common practice to create separate partitions that isolate volatile and widely used 42 | Chapter 5: Space-Based Architecture transactional data from non-active data, in order to reduce the memory footprint of the in-memory data grid within each process‐ ing unit. It is important to note that while the alternative name of this pattern is the cloud-based architecture, the processing units (as well as the virtualized middleware) do not have to reside on cloud-based hos‐ ted services or PaaS (platform as a service). It can just as easily reside on local servers, which is one of the reasons I prefer the name “space-based architecture.” From a product implementation perspective, you can implement many of the architecture components in this pattern through third- party products such as GemFire, JavaSpaces, GigaSpaces, IBM Object Grid, nCache, and Oracle Coherence. Because the imple‐ mentation of this pattern varies greatly in terms of cost and capabili‐ ties (particularly data replication times), as an architect, you should first establish what your specific goals and needs are before making any product selections. Pattern Analysis The following table contains a rating and analysis of the common architecture characteristics for the space-based architecture pattern. The rating for each characteristic is based on the natural tendency for that characteristic as a capability based on a typical implementa‐ tion of the pattern, as well as what the pattern is generally known for. For a side-by-side comparison of how this pattern relates to other patterns in this report, please refer to Appendix A at the end of this report. Overall agility Rating: High Analysis: Overall agility is the ability to respond quickly to a constantly changing environment. Because processing units (deployed instances of the application) can be brought up and down quickly, applications respond well to changes related to an increase or decrease in user load (environment changes). Architectures created using this pattern generally respond well to coding changes due to the small application size and dynamic nature of the pattern. Pattern Analysis | 43 Ease of deployment Rating: High Analysis: Although space-based architectures are generally not decoupled and distributed, they are dynamic, and sophisticated cloud-based tools allow for applications to easily be “pushed” out to servers, simplifying deployment. Testability Rating: Low Analysis: Achieving very high user loads in a test environment is both expensive and time consuming, making it difficult to test the scalability aspects of the application. Performance Rating: High Analysis: High performance is achieved through the in-memory data access and caching mechanisms build into this pattern. Scalability Rating: High Analysis: High scalability come from the fact that there is little or no dependency on a centralized database, therefore essen‐ tially removing this limiting bottleneck from the scalability equation. Ease of development Rating: Low Analysis: Sophisticated caching and in-memory data grid prod‐ ucts make this pattern relatively complex to develop, mostly because of the lack of familiarity with the tools and products used to create this type of architecture. Furthermore, special care must be taken while developing these types of architectures to make sure nothing in the source code impacts performance and scalability. 44 | Chapter 0: Space-Based Architecture APPENDIX A Pattern Analysis Summary Figure A-1 summarizes the pattern-analysis scoring for each of the architecture patterns described in this report. This summary will help you determine which pattern might be best for your situation. For example, if your primary architectural concern is scalability, you can look across this chart and see that the event-driven pattern, microservices pattern, and space-based pattern are probably good architecture pattern choices. Similarly, if you choose the layered architecture pattern for your application, you can refer to the chart to see that deployment, performance, and scalability might be risk areas in your architecture. 45 Figure A-1. Pattern-analysis summary While this chart will help guide you in choosing the right pattern, there is much more to consider when choosing an architecture pat‐ tern. You must analyze all aspects of your environment, including infrastructure support, developer skill set, project budget, project deadlines, and application size (to name a few). Choosing the right architecture pattern is critical, because once an architecture is in place, it is very hard (and expensive) to change. 46 | Appendix A: Pattern Analysis Summary About the Author Mark Richards is an experienced, hands-on software architect involved in the architecture, design, and implementation of micro‐ services architectures, service-oriented architectures, and dis‐ tributed systems in J2EE and other technologies. He has been in the software industry since 1983 and has significant experience and expertise in application, integration, and enterprise architecture. Mark served as the president of the New England Java Users Group from 1999 through 2003. He is the author of numerous technical books and videos, including Software Architecture Fundamen‐ tals (O’Reilly video), Enterprise Messaging (O’Reilly video), Java Message Service, 2nd Edition (O’Reilly), and a contributing author to 97 Things Every Software Architect Should Know (O’Reilly). Mark has a master’s degree in computer science and numerous architect and developer certifications from IBM, Sun, The Open Group, and BEA. He is a regular conference speaker at the No Fluff Just Stuff (NFJS) Symposium Series and has spoken at more than 100 conferences and user groups around the world on a vari‐ ety of enterprise-related technical topics. When he is not working, Mark can usually be found hiking in the White Mountains or along the Appalachian Trail.