The MagPi, Issue 40

The MagPi Issue 40This month’s MagPi, the official magazine of the Raspberry Pi Foundation, is just a little bit special: it is, to my knowledge, the first magazine ever to include a cover-mounted computer. The release of the magazine today also represents the launch of a brand-new Raspberry Pi model: the Raspberry Pi Zero.

I’ve been lucky enough to have been playing with the Pi Zero for some time, having worked on three of the hardware projects you’ll find between the covers of this extra-special issue. After peeling the Pi Zero from the cover, readers will be shown how to solder general-purpose input/output (GPIO) headers onto its otherwise extremely flat face, connect its serial port to a computer for use as a true random number generator (TRNG), and use it with an existing HAT add-on to act as a mood lamp.

The three projects I created for this issue were chosen from a long, long list. The Pi Zero is an exciting device: it features the same specifications as the Raspberry Pi Model A, but in a brand-new form factor a fraction of the size of the original. Naturally, some features have been cut: just like the Model A there’s no Ethernet chip, but there are also no CSI or DSI connectors and no analogue audio or video ports – though composite video is broken out to a solder pad for the adventurous. The ports that do remain have also been modified: the full-size HDMI port is replaced by a mini-HDMI, and the full-size USB port is a micro-USB port which requires a USB On-The-Go (OTG) adapter before it can be connected to standard USB peripherals.

In doing this, the Foundation has created a device that excites me even more than the full-size models. With a production cost so low that it can be cover-mounted on a high-street magazine, it’s now possible to put a full Linux computer in more project than ever before – and with a simple low-cost USB OTG adapter and a Wi-Fi dongle, it can be networked for a total outlay of well below $10. It is, in short, a game-changer, and I look forward to working on many more Pi Zero-related projects in the near future.

If that wasn’t enough, you’ll also find my review of the Tenma 60W Digital Soldering Station which has been my trusty companion in various projects over the last couple of years. It’s always nice to be able to give a device a good, long-haul test before drawing your conclusions and I’ve certainly put the miles in on the Tenma. As I warn in the review a hobbyist doesn’t strictly need a soldering station, but it does make life easier – and the low cost of this unit, purchased from CPC, makes it easy to recommend for those who fancy an upgrade.

All this, plus more – and, remember the cover-mounted Pi Zero – is available in your nearest WH Smith. The magazine itself is also available as a DRM-free PDF download from the official website, licensed under Creative Commons terms, but obviously you’ll have to buy a Pi Zero separately if you want to follow along with any of my projects.