在 CentOS 6.4(64位) 安装 docker.io

jopen 10年前

Docker.io 是轻量级的“容器引擎+映像仓库”,在LXC(linux轻量级容器)的基础上构建,可以运行任何应用程序。

docker.io的核心层由以下几个部分组成:

1、可执行程序,“/usr/bin/docker”

2、docker.io网站上有一系列创建好的操作系统和应用程序映像

3、AUFS(另一个统一文件系统)来实现文件系统的快照,文件变化,控制只读或读写的需求。

4、LXC(Linux轻量级容器)

5、Cgroups(各种资源和命名空间的管理)

在本文写作的时候,最新版本是0.5.3,但目前开发很活跃,一些功能和特性可能在新版本中会发生变化。

按下面的步骤安装docker.io:

0、安装centos6.x

1、因为selinux和LXC有冲突,所以需要禁用

[root@localhost ~]# cat /etc/selinux/config   # This file controls the state of SELinux on the system.  # SELINUX= can take one of these three values:  #       enforcing - SELinux security policy is enforced.  #       permissive - SELinux prints warnings instead of enforcing.  #       disabled - SELinux is fully disabled.  SELINUX=disabled  # SELINUXTYPE= type of policy in use. Possible values are:  #       targeted - Only targeted network daemons are protected.  #       strict - Full SELinux protection.  SELINUXTYPE=targeted

2、配置Fedora EPEL 源

sudo yum install http://ftp.riken.jp/Linux/fedora/epel/6/i386/epel-release-6-8.noarch.rpm

3、配置hop5.in源

cd /etc/yum.repos.d  sudo wget http://www.hop5.in/yum/el6/hop5.repo

4、安装docker-io

[root@localhost ~]# yum install docker-io  Loaded plugins: fastestmirror, security  Loading mirror speeds from cached hostfile   * base: centos.excellmedia.net   * epel: kartolo.sby.datautama.net.id   * extras: centos.excellmedia.net   * updates: centos.excellmedia.net  Setting up Install Process  Resolving Dependencies  --> Running transaction check  ---> Package docker-io.x86_64 0:0.5.3-4.el6 will be installed  --> Processing Dependency: lxc >= 0.8.0 for package: docker-io-0.5.3-4.el6.x86_64  --> Processing Dependency: kernel-ml-aufs >= 3.10.5 for package: docker-io-0.5.3-4.el6.x86_64  --> Running transaction check  ---> Package kernel-ml-aufs.x86_64 0:3.10.5-3.el6 will be installed  ---> Package lxc.x86_64 0:0.8.0-3.el6 will be installed  --> Processing Dependency: liblxc.so.0()(64bit) for package: lxc-0.8.0-3.el6.x86_64  --> Running transaction check  ---> Package lxc-libs.x86_64 0:0.8.0-3.el6 will be installed  --> Finished Dependency Resolution    Dependencies Resolved    ============================================================================================   Package                   Arch              Version                  Repository       Size  ============================================================================================  Installing:   docker-io                 x86_64            0.5.3-4.el6              hop5            1.2 M  Installing for dependencies:   kernel-ml-aufs            x86_64            3.10.5-3.el6             hop5             33 M   lxc                       x86_64            0.8.0-3.el6              hop5             81 k   lxc-libs                  x86_64            0.8.0-3.el6              hop5             75 k    Transaction Summary  ============================================================================================  Install       4 Package(s)    Total download size: 34 M  Installed size: 159 M  Is this ok [y/N]: y  Downloading Packages:  (1/4): docker-io-0.5.3-4.el6.x86_64.rpm                              | 1.2 MB     00:03       (2/4): kernel-ml-aufs-3.10.5-3.el6.x86_64.rpm                        |  33 MB     00:33       (3/4): lxc-0.8.0-3.el6.x86_64.rpm                                    |  81 kB     00:00       (4/4): lxc-libs-0.8.0-3.el6.x86_64.rpm                               |  75 kB     00:00       --------------------------------------------------------------------------------------------  Total                                                       896 kB/s |  34 MB     00:39       Running rpm_check_debug  Running Transaction Test  Transaction Test Succeeded  Running Transaction    Installing : lxc-libs-0.8.0-3.el6.x86_64                                              1/4     Installing : lxc-0.8.0-3.el6.x86_64                                                   2/4     Installing : kernel-ml-aufs-3.10.5-3.el6.x86_64                                       3/4     Installing : docker-io-0.5.3-4.el6.x86_64                                             4/4     Verifying  : kernel-ml-aufs-3.10.5-3.el6.x86_64                                       1/4     Verifying  : lxc-0.8.0-3.el6.x86_64                                                   2/4     Verifying  : lxc-libs-0.8.0-3.el6.x86_64                                              3/4     Verifying  : docker-io-0.5.3-4.el6.x86_64                                             4/4     Installed:    docker-io.x86_64 0:0.5.3-4.el6                                                                Dependency Installed:    kernel-ml-aufs.x86_64 0:3.10.5-3.el6               lxc.x86_64 0:0.8.0-3.el6                  lxc-libs.x86_64 0:0.8.0-3.el6                         Complete!  [root@localhost ~]#

5、检查安装情况

[root@localhost ~]# docker -h  Usage of docker:    -D=false: Debug mode    -H=[unix:///var/run/docker.sock]: tcp://host:port to bind/connect to or unix://path/to/socket to use    -api-enable-cors=false: Enable CORS requests in the remote api.    -b="": Attach containers to a pre-existing network bridge. Use 'none' to disable container networking    -d=false: Daemon mode    -dns="": Set custom dns servers    -g="/var/lib/docker": Path to graph storage base dir.    -p="/var/run/docker.pid": File containing process PID    -r=false: Restart previously running containers

6、要想docker正常运行还需要在/etc/fstab里增加cgroup文件系统

[root@localhost ~]# echo "none                    /sys/fs/cgroup          cgroup  defaults        0 0" >> /etc/fstab
[root@localhost ~]# mount /sys/fs/cgroup

只有重新启动才能挂载/sys/fs/cgroup(因为当前运行的内核不支持cgroup),所以上面挂载的命令也可以不执行,但系统需要重新启动。

7、重启系统,选择“3.10.5-3.el6.x86_64”内核

8、系统启动后,确认当前运行的内核

[root@localhost ~]# uname -r  3.10.5-3.el6.x86_64    [root@localhost ~]# grep aufs /proc/filesystems   nodev   aufs

9、以守护模式运行docker.io(在一个新的终端里)

[root@localhost ~]# docker -d   2013/08/21 07:47:07 WARNING: Your kernel does not support cgroup swap limit.  2013/08/21 07:47:07 Listening for HTTP on /var/run/docker.sock (unix)

10、在centos6.4容器里输出hello world

[root@localhost ~]# docker run centos:6.4 echo "hello world"  2013/08/21 07:48:41 POST /v1.4/containers/create  2013/08/21 07:48:41 POST /v1.4/containers/c6bc9e80097e/start  2013/08/21 07:48:41 POST /v1.4/containers/c6bc9e80097e/attach?logs=1&stderr=1&stdout=1&stream=1  hello world

11、从容器里测试ping

[root@localhost ~]# docker -dns '8.8.8.8' run centos:6.4 ping -c 3 yahoo.com  2013/08/21 08:02:15 POST /v1.4/containers/create  2013/08/21 08:02:15 POST /v1.4/containers/c40a1244f9bc/start  2013/08/21 08:02:15 POST /v1.4/containers/c40a1244f9bc/attach?logs=1&stderr=1&stdout=1&stream=1  PING yahoo.com (98.138.253.109) 56(84) bytes of data.  64 bytes from ir1.fp.vip.ne1.yahoo.com (98.138.253.109): icmp_seq=1 ttl=48 time=323 ms  64 bytes from ir1.fp.vip.ne1.yahoo.com (98.138.253.109): icmp_seq=2 ttl=48 time=329 ms  64 bytes from ir1.fp.vip.ne1.yahoo.com (98.138.253.109): icmp_seq=3 ttl=49 time=302 ms    --- yahoo.com ping statistics ---  3 packets transmitted, 3 received, 0% packet loss, time 2304ms  rtt min/avg/max/mdev = 302.032/318.318/329.656/11.807 ms

常见错误:

"DNS/Networking Errors inside the docker"

[root@localhost ~]# docker -dns="8.8.8.8" run centos:6.4 yum install hiphop-php  2013/08/21 07:53:05 POST /v1.4/containers/create  2013/08/21 07:53:05 POST /v1.4/containers/6d9fef14bd1a/start  2013/08/21 07:53:05 POST /v1.4/containers/6d9fef14bd1a/attach?logs=1&stderr=1&stdout=1&stream=1  Loaded plugins: fastestmirror  Error: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again  Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was  14: PYCURL ERROR 6 - "Couldn't resolve host 'mirrorlist.centos.org'"

可以执行下面的命令来重置docker的运行环境,从而解决上述问题。

pkill docker  iptables -t nat -F  ifconfig docker0 down  brctl delbr docker0  docker -d

感谢sciurus在创建kernel-ml-aufs的相关文件时付出的辛勤工作。